CMSPageEditController

Attempts to locate and call a method dynamically added to a class at runtime if a default cannot be located

You can add extra methods to a class using Extensions}, {@link Object::createMethod() or Object::addWrapperMethod()

Adds any methods from Extension instances attached to this object.

All these methods can then be called directly on the instance (transparently mapped through __call()}), or called explicitly through {@link extend().

Register an callback to invoke that defines extra methods

Return TRUE if a method exists on this object

This should be used rather than PHP's inbuild method_exists() as it takes into account methods added via extensions

Determines if a custom method with this name is defined.

Get meta-data details on a named method

Return the names of all the methods available on this object

Get all public built in methods for this class

Find all methods on the given object.

Add all the methods from an object property.

Add all the methods from an object property (which is an Extension) to this object.

Add a wrapper method - a method which points to another method with a different name. For example, Thumbnail(x) can be wrapped to generateThumbnail(x)

Add callback as a method.

Allows user code to hook into Object::extend prior to control being delegated to extensions. Each callback will be reset once called.

Allows user code to hook into Object::extend after control being delegated to extensions. Each callback will be reset once called.

Adds any methods from Extension instances attached to this object.

All these methods can then be called directly on the instance (transparently mapped through __call()}), or called explicitly through {@link extend().

Add an extension to a specific class.

The preferred method for adding extensions is through YAML config, since it avoids autoloading the class, and is easier to override in more specific configurations.

As an alternative, extensions can be added to a specific class directly in the Object::$extensions array. See SiteTree::$extensions for examples. Keep in mind that the extension will only be applied to new instances, not existing ones (including all instances created through singleton()).

Remove an extension from a class.

Note: This will not remove extensions from parent classes, and must be called directly on the class assigned the extension.

Keep in mind that this won't revert any datamodel additions of the extension at runtime, unless its used before the schema building kicks in (in your _config.php). Doesn't remove the extension from any Object instances which are already created, but will have an effect on new extensions. Clears any previously created singletons through singleton() to avoid side-effects from stale extension information.

No description

Get extra config sources for this class

Return TRUE if a class has a specified extension.

This supports backwards-compatible format (static Object::has_extension($requiredExtension)) and new format ($object->has_extension($class, $requiredExtension))

Calls a method if available on both this object and all applied Extensions, and then attempts to merge all results into an array

Run the given function on all of this object's extensions. Note that this method originally returned void, so if you wanted to return results, you're hosed

Currently returns an array, with an index resulting every time the function is called. Only adds returns if they're not NULL, to avoid bogus results from methods just defined on the parent extension. This is important for permission-checks through extend, as they use min() to determine if any of the returns is FALSE. As min() doesn't do type checking, an included NULL return would fail the permission checks.

The extension methods are defined during __construct()} in {@link defineMethods().

Get an extension instance attached to this object by name.

Returns TRUE if this object instance has a specific extension applied in $extension_instances. Extension instances are initialized at constructor time, meaning if you use add_extension() afterwards, the added extension will just be added to new instances of the extended class. Use the static method has_extension() to check if a class (not an instance) has a specific extension.

Caution: Don't use singleton()->hasExtension() as it will give you inconsistent results based on when the singleton was first accessed.

Get all extension instances for this specific object instance.

See get_extensions() to get all applied extension classes for this class (not the instance).

This method also provides lazy-population of the extension_instances property.

An implementation of the factory method, allows you to create an instance of a class

This method will defer class substitution to the Injector API, which can be customised via the Config API to declare substitution classes.

This can be called in one of two ways - either calling via the class directly, or calling on Object and passing the class name as the first parameter. The following are equivalent: $list = DataList::create(SiteTree::class); $list = SiteTree::get();

Creates a class instance by the "singleton" design pattern.

It will always return the same instance for this class, which can be used for performance reasons and as a simple way to access instance methods which don't rely on instance data (e.g. the custom SilverStripe static handling).

Get a configuration accessor for this class. Short hand for Config::inst()->get($this->class, .....).

Gets the uninherited value for the given config option

No description

Check if a field exists on this object or its failover.

Note that, unlike the core isset() implementation, this will return true if the property is defined and set to null.

Get the value of a property/field on this object. This will check if a method called get{$property} exists, then check if a field is available using ViewableData::getField(), then fall back on a failover object.

Set a property/field on this object. This will check for the existence of a method called set{$property}, then use the ViewableData::setField() method.

Set a failover object to attempt to get data from if it is not present on this object.

Get the current failover object if set

Check if a field exists on this object. This should be overloaded in child classes.

Get the value of a field on this object. This should be overloaded in child classes.

Set a field on this object. This should be overloaded in child classes.

No description

No description

No description

Merge some arbitrary data in with this object. This method returns a ViewableData_Customised instance with references to both this and the new custom data.

Note that any fields you specify will take precedence over the fields on this object.

Return true if this object "exists" i.e. has a sensible value

This method should be overridden in subclasses to provide more context about the classes state. For example, a DataObject class could return false when it is deleted from the database

No description

No description

No description

Return the "casting helper" (a piece of PHP code that when evaluated creates a casted value object) for a field on this object. This helper will be a subclass of DBField.

Get the class name a field on this object will be casted to.

Return the string-format type for the given field.

Render this object into the template, and get the result as a string. You can pass one of the following as the $template parameter:

• a template name (e.g. Page)
• an array of possible template names - the first valid one will be used
• an SSViewer instance

Generate the cache name for a field

Get a cached value from the field cache

Store a value in the field cache

Clear object cache

Get the value of a field on this object, automatically inserting the value into any available casting objects that have been specified.

A simple wrapper around ViewableData::obj() that automatically caches the result so it can be used again without re-running the method.

Checks if a given method/field has a valid value. If the result is an object, this will return the result of the exists method, otherwise will check if the result is not just an empty paragraph tag.

Get the string value of a field on this object that has been suitable escaped to be inserted directly into a template.

Get an array of XML-escaped values by field name

Return a single-item iterator so you can iterate over the fields of a single record.

This is useful so you can use a single record inside a <% control %> block in a template - and then use to access individual fields on this object.

Find appropriate templates for SSViewer to use to render this object

When rendering some objects it is necessary to iterate over the object being rendered, to do this, you need access to itself.

Get part of the current classes ancestry to be used as a CSS class.

This method returns an escaped string of CSS classes representing the current classes ancestry until it hits a stop point - e.g. "Page DataObject ViewableData".

Return debug information about this object that can be rendered into a template

Executes this controller, and return an HTTPResponse object with the result.

This method defers to RequestHandler->handleRequest() to determine which action should be executed

Note: You should rarely need to overload handleRequest() - this kind of change is only really appropriate for things like nested controllers - ModelAsController} and {@link RootURLController are two examples here. If you want to make more orthodox functionality, it's better to overload init()} or {@link index().

Important: If you are going to overload handleRequest, make sure that you start the method with $this->beforeHandleRequest() and end the method with $this->afterHandleRequest()

No description

No description

Controller's default action handler. It will call the method named in "$Action", if that method exists. If "$Action" isn't given, it will use "index" as a default.

Get a array of allowed actions defined on this controller, any parent classes or extensions.

Caution: Since 3.1, allowed_actions definitions only apply to methods on the controller they're defined on, so it is recommended to use the $class argument when invoking this method.

No description

Return the class that defines the given action, so that we know where to check allowed_actions.

Overrides RequestHandler to also look at defined templates.

Check that the given action is allowed to be called from a URL.

It will interrogate RequestHandler::$allowed_actions to determine this.

Throws a HTTP error response encased in a HTTPResponse_Exception, which is later caught in RequestHandler::handleAction() and returned to the user.

Returns the HTTPRequest object that this controller is using.

Returns a placeholder NullHTTPRequest object unless handleAction()} or {@link handleRequest() have been called, which adds a reference to an actual HTTPRequest object.

Typically the request is set through handleAction() or handleRequest(), but in some based we want to set it manually.

Override LeftAndMain Link to allow blank URL segment for CMSMain.

Get the absolute URL for this controller, including protocol and host.

Returns null if no link could be generated.

Overloaded redirection logic to trigger a fake redirect on ajax requests.

While this violates HTTP principles, its the only way to work around the fact that browsers handle HTTP redirects opaquely, no intervention via JS is possible. In isolation, that's not a problem - but combined with history.pushState() it means we would request the same redirection URL twice if we want to update the URL as well. See LeftAndMain.js for the required jQuery ajaxComplete handlers.

Safely get the value of the BackURL param, if provided via querystring / posted var

Get referer

Redirect back. Uses either the HTTP-Referer or a manually set request-variable called "BackURL".

This variable is needed in scenarios where HTTP-Referer is not sent (e.g when calling a page by location.href in IE). If none of the two variables is available, it will redirect to the base URL (see Director::baseURL()).

Convert an array of data to JSON and wrap it in an HTML tag as pjax is used and jQuery will parse this as an element on the client side in LeftAndMain.js handleAjaxResponse() The attribute type="application/json" denotes this is a data block and won't be processed by a browser https://html.spec.whatwg.org/#the-script-element

No description

A stand in function to protect the init function from failing to be called as well as providing before and after hooks for the init function itself

This should be called on all controllers before handling requests

A bootstrap for the handleRequest method

Cleanup for the handleRequest method

Prepare the response (we can receive an assortment of response types (strings/objects/HTTPResponses) and changes the controller response object appropriately

No description

Returns the parameters extracted from the URL by the Director.

Returns the HTTPResponse object that this controller is building up. Can be used to set the status code and headers.

Sets the HTTPResponse object that this controller is building up.

This is the default action handler used if a method doesn't exist. It will process the controller object with the template returned by getViewer().

Returns the action that is being executed on this controller.

Return the viewer identified being the default handler for this Controller/Action combination.

Removes all the "action" part of the current URL and returns the result. If no action parameter is present, returns the full URL.

Returns TRUE if this controller has a template that is specifically designed to handle a specific action.

Render the current controller with the templates determined by getViewer().

Returns the current controller.

Tests whether we have a currently active controller or not. True if there is at least 1 controller in the stack.

Returns true if the member is allowed to do the given action. Defaults to the currently logged in user.

Pushes this controller onto the stack of current controllers. This means that any redirection, session setting, or other things that rely on Controller::curr() will now write to this controller object.

Note: Ensure this controller is assigned a request with a valid session before pushing it to the stack.

Pop this controller off the top of the stack.

Tests whether a redirection has been requested. If redirect() has been called, it will return the URL redirected to. Otherwise, it will return null.

Joins two or more link segments together, putting a slash between them if necessary. Use this for building the results of Link() methods. If either of the links have query strings, then they will be combined and put at the end of the resulting url.

Caution: All parameters are expected to be URI-encoded already.

Normalises a URL according to the configuration for add_trailing_slash

No description

Gets the combined configuration of all LeftAndMain subclasses required by the client app.

Returns configuration required by the client app.

Get form schema helper

Set form schema helper for this controller

Gets a JSON schema representing the current edit form.

Creates a successful json response

Return an error HTTPResponse encoded as json

No description

Check if the current request has a X-Formschema-Request header set.

Used by conditional logic that responds to validation results

Generate schema for the given form based on the X-Formschema-Request header value

No description

Get list of required permissions

No description

If this is set to true, the "switchView" context in the template is shown, with links to the staging and publish site.

Get menu title for this section (translated)

Return styling for the menu icon, if a custom icon is set for this class

Example: static $menu-icon = '/path/to/image/';

Return the web font icon class name for this interface icon. Uses the built in SilveStripe webfont. {menu_icon_for_class()} for providing a background image.

No description

No description

Returns the main menu of the CMS. This is also used by init() to work out which sections the user has access to.

No description

No description

Return appropriate template(s) for this class, with the given suffix using SSViewer::get_templates_by_class()

No description

Render $PreviewPanel content

Get a database record to be managed by the CMS.

No description

Gets the current search filter for this request, if available

Save and Publish page handler

No description

Delete the current page from draft stage.

Retrieves an edit form, either for display, or to process submitted data.

Also used in the template rendered through Right() in the $EditForm placeholder.

This is a "pseudo-abstract" method, usually connected to a getEditForm() method in an entwine subclass. This method can accept a record identifier, selected either in custom logic, or through currentPageID(). The form usually construct itself from DataObject->getCMSFields() for the specific managed subclass defined in LeftAndMain::$tree_class.

No description

Returns a placeholder form, used by getEditForm() if no record is selected.

Our javascript logic always requires a form to be present in the CMS interface.

Handler for all global modals